ENGLISH
1. General Notes
Read this user’s manual completely and carefully. It is part of
the product and contains important notes for operation.
Keep this document for other users or for personal reference.
MK897, MK3189, MK3190
2. Intended Use and Application
Any use other than that described in the Category
Description and Function is not permitted. These patch
cables may only be used for indoor networking applications
within controlled environments. Failure to observe and
comply with these regulations and safety instructions may
result in network disruptions and potential damage to
equipment and data. Patch cables in this category are
designed specifically for connecting network devices in
office, data center, or similar indoor settings. They are not
intended for use in industrial or outdoor networking
environments or with heavy-duty equipment
3. Description and Function
This product is designed to detect motion and trigger an
appropriate response, such as turning on lights or sounding
an alarm. It uses infrared technology to sense changes in
heat patterns caused by moving objects. The motion detector
is typically installed on walls or ceilings in areas where
motion needs to be detected, such as hallways, entrances, or
outdoor spaces. It is commonly used for security purposes to
detect unauthorized movement and provide an alert.
4. Safety Instructions
- Before installation, carefully read and understand the
manufacturer's instructions.
- Ensure the power supply is disconnected before installing
or servicing the motion detector.
- Install the motion detector in accordance with the
manufacturer's instructions and applicable electrical codes.
- Do not install the motion detector near heat sources, such
as heaters or direct sunlight, as this may affect its
performance.
- Avoid installing the motion detector in areas with excessive
vibration or movement, as this may cause false alarms.
- Regularly inspect the motion detector for any visible
damage or signs of tampering. If damaged, do not use and
contact the - manufacturer for assistance.
- Do not attempt to disassemble or modify the motion
detector. This may result in malfunction or void the warranty.
- Keep the motion detector clean and free from dust or
debris that may obstruct its sensors.
- Test the motion detector regularly to ensure proper
functionality. Follow the manufacturer's instructions for
testing procedures.
- If the motion detector is connected to other devices or
systems, ensure they are compatible and properly integrated.
- In case of false alarms, adjust the sensitivity settings or
reposition the motion detector to minimize unwanted
triggers.
- If the motion detector is used for security purposes,
consider additional measures such as surveillance cameras
or alarm - systems for comprehensive protection.
- In case of any malfunction or abnormal behavior of the
motion detector, immediately disconnect the power supply
and contact a - qualified technician for inspection and repair.
- Dispose of the motion detector in accordance with local
regulations and guidelines for electronic waste disposal.
5. Specifications
Sensor Type: Infrared Wall Motion Sensor
Detection Angle: 160°
Power Input: 220-240V AC
Ingress Protection Rating: IP20
6. CE Conformity
We declare that this product complies with all applicable and
latest CE comp-liance directives. The CE declaration of
conformity is available on our website.
6.1 UKCA Conformity
The UKCA (UK Conformity Assessed) marking is a certification
mark used in the United Kingdom to indicate that a product
complies with relevant UK regulations and standards for
safety and performance. It is required for a wide range of
products, including machinery, electronics, toys, and more, in
order to be legally sold in the UK market.
7. Disposal of the Device
This product falls under the scope of the Waste Electrical and
Electronic Equipment (WEEE) Directive. This directive aims to
minimize the impact of electronic waste on the environment
by promoting proper disposal and recycling. By following the
proper disposal procedures outlined above, you contribute
to the sustainable management of electronic waste and help
protect the environment for future generations. If you have
any questions or need further guidance on the correct
disposal of the product, please feel free to contact our
customer support.
7.1 Recycling
This recycling symbol shows that the packaging is reusable,
i.e.recyclable. The three arrows in the triangle symbolize the
recycling cycle.
7.2 France: Triman
Our products and packaging can be recycled, so don't throw
them away! Find out where to drop them off at
www.quefairedemesdechets.fr.
7.4 Italy: Eco-labelling
Check the regulations of your municipality.
7.3 Low Density Polyethylene
Low Density Polyethylene (LDPE) is a type of polyolefin
plastic used in many different applications including food
packaging, storage containers, toys, building materials and
automotive parts.
8. Disclaimer of Liability
Our company accepts no liability or warranty for damage
caused by improper installation, assembly and use of the
product or by failure to observe the operating instructions
and/or safety instructions.
9. Company Information
EU: memoryking GmbH & Co.KG
Päwesiner Weg 20, 13581 Berlin, Deutschland
WEEE Reg.-No.: DE 81 933 733
UK: deleyCON LTD.
Carpenter Court 1, Maple Road, Bramhall
Stockport, Cheshire KD7 2DH, United Kingdom
www.deleycon.com
France numéros d'enregistrement (EPR):
WEEE: FR022181_05BQQY
Papier: FR207793_03JGEK
Emballage: FR207793_01NFZF
Meubles: FR043806_10VD5U
Irland (EPR):
WEEE: 03228W
España números de registro (EPR):
Embalaje: ENV/2023/000026437
WEEE: 6991
Polska numer rejestracyjny (EPR):
WEEE: 0000006411
UK (EPR):
WEEE: WEE/MM6467AA
Italia numero di registrazione (EPR):
WEEE: IT19080000011617
Portugal número de registro (EPR):
Embalagem: PT01110003
WEEE: PT101663
Motion Detectors Quickstart Guide
To Next Page
Loading...
Need help?
General
