16 17
USER´S MANUAL USER´S MANUAL
1 SAFETY INSTRUCTIONS
ATTENTION!
Only skilled electricians may assemble and disassemble the housing of the product.
DANGER! Risk of life by electric shock!
Avoid contacting mains voltages! Turn off the power of all circuits before working on the
product!
ATTENTION! Risk of short-circuit!
Never bridge contacts! Do not put things into ventilation slots or ports!
ATTENTION! Risk of injury by falling parts or impacts!
Mind respectable connections! Install the product in the mentioned height!
• This product is not a toy and is not meant for children, because it contains small parts which can
be swallowed and can injure when used inappropriately!
• Do not use any damaged products or parts.
• Remove or store the packing materials well, because children may cut themselves on them while
playing. Furthermore, there is a risk of swallowing and inhalating of incidentals and insulating
material.
• Install and store the product and its accessories in a way that does not infringe any person or
property damage, e. g. due to falling or stumbling.
• Avoid extreme influences, e.g. like heat and coldness, humidity and direct sun insolation,
vibrations and mechanical pressure.
• Do notmodify or changethe product or its accessories! Also mind chapter “warranty and
liability“.
• Mind the specifications for transporting and use applicable methods, e.g. by using the original
packing.
• If defects, mechanical damages, disturbances or other problems occur, which are not solvable
with this manual, take the device out of work immediately and consult your dealer for questions,
repairingorchangelikeitisdescribedinchapter“warrantyandliability“.
• A defective device may not be put into operation, but must be protected against further
use. Repairing, such as assembling and disassembling the housing is only allowed to skilled
professionals. By repairing it yourself you will lose all warranties and there is a risk of electric
shock and short circuit.
• Motion sensors are not suitable for use as components of an alarm system. They can trigger false
alarms if the installation place has been chosen unfavourably.
2 DESCRIPTION AND FUNCTION
This product is an infrared motion sensor for indoors and is specified as installation material. It reacts
to heat radiation (infrared radiation) of moving objects that enter the detection area of the sensor,
eg.peopleandanimals,etc.Thesensormust„see“theareawhichismonitored.Thermalradiation
propagates in a straight line, but is stopped by glass or other solid objects.
Entering the detection area of the sensor switches the connected electrical consumer on and after a
(adjustable) time off again automatically. A built-in photocell prevents working of the motion sensor
during sunlight. In addition, the ambient brightness can
be adjusted by a regulator.
EN
To Next Page
Loading...
Need help?
General
