24
4.2 WORK CYCLE
Important!
Before fitting the plug, make sure the power voltage corresponds to that on the CE
marking plate.
• Make sure the power plug is correctly fitted in the power socket.
• Make sure the flexible hose is properly fitted and locked in the vacuum pipe union.
• Make sure the power cable and any extension used are integral and in perfect condition.
• Block the vacuum cleaner by means of the retainer provided.
• Grip one end of the flexible hose complete with selected accessory.
• Press the START button and start vacuuming.
• To stop the vacuum cleaner, press the STOP button.
Caution!
Before switching the vacuum cleaner back on, make sure the motors have come to a
complete halt.
• After finishing work, disconnect the vacuum cleaner from the power socket.
DM3 ENTRY-LEVEL
To Next Page
Loading...
