Delfin VapoMeter SWL5 - DISPLAY MESSAGES

VapoMeter SWL5 User Manual 1.3
10.11.2016
17
DISPLAY MESSAGES
Message
Explanation
USE STANDARD/
SMALL ADAPTER
Check that a corresponding adapter is in use.
PRESS TO MEASURE
Instrument is ready to measure. Press the operating button to
proceed.
. 3, 2, 1 (timer before
skin contact)
Prepare to place the VapoMeter on the skin.
Do not keep the device near the skin or other sources of
evaporation.
ONTO SKIN
Place the VapoMeter onto the skin during the long tone.
MEASURING
Signal recording, keep the VapoMeter on the skin. The
progress bar shows the measuring time left.
OFF SKIN
The measurement is ready. Remove the VapoMeter from
the skin.
VENTILATE
NN % remaining
Let the measurement chamber ventilate freely. Ventilation
can be speeded by waiving the VapoMeter gently. The
progress bar shows the ventilation time left.
POWER OFF
Instrument is switched off.
NO PC
No PC connection detected.
MEASURING ABORTED
Measurement has been aborted, wait until ventilation is
finished and message PRESS TO MEASURE appears before
the next measurement.
APPENDIX A