EasyManua.ls Logo

delight 20296B - Maintenance and Care

delight 20296B
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5. Time / minimum performance display
in the middle of the screen, the minimum
Watt value is shown, while the abbreviation
of „lo i.e. Low can be seen at the bottom of
the device.
6. Time / Maximum power displayed
,
similarly to the display of the minimum
value, in the middle of the disply, the
measured maximum value is shown in watts,
while at the bottom of the display you can
see the abbreviation hi, i.e. High.
7. Time / View cost: This menu is used to set
the unit price of the electricity. The set unit
price can be read in the lower part of the
display (in currency unit/kWh)
Set unit price:
Use the MODE (2) button to navigate to the
Time / Price (7) menu point as just mentioned,
then briey press the COST (3) button once. The
currently set unit price is displayed at the bottom
of the display, which can be changed by pressing
the „COST (3) button for at least 3 seconds. Then
the characters starts ashing, indicating that
the value can be edited. You can set the desired
value using the UP (4) and DOWN (5) buttons.
You can switch between individual characters by
pressing the Mode (2) button. You can save the set
value by pressing the COST (3) button!
Attention! „OVERLOAD” is displayed if the total
load of the connected device/devices exceeds
the maximum allowed value. (max. 3860 W) In
this case, immediately disconnect the connected
device from the electrical network!
Delete all data:
Press the ,,RESET button (6) with a pointed
object to erase all data stored in the memory.
After successful deletion, all the digits on the
display (1) light up for a few seconds.
Maintenance and care:
It does not require special maintenance. Risk of
electric shock! It is forbidden to disassemble the
device housing, remove the screws or modify the
device! Before cleaning the ow meter, unplug
it from the mains socket and do not connect any
devices to it. Clean the device only with a soft,
clean, dry cloth.
Electronic waste management:
The used consumption measuring device must not
be treated as household waste and thrown in the
garbage. Electrical waste must be dropped o at
a collection point! Ask your local authorities about
the nearest collection point or the possibility of
environmentally friendly disposal of the device.
HU
Fogyasztásmérő
költségszámítással
Jelmagyarázat
Figyelem, veszély!
Az ezzel a szimbólummal jelölt
biztonsági előírásokat feltétlenül
gyelembe kell venni. Figyelmen
kívül hagyásuk súlyos és messzire
nyúló egészségi ártalmakat, valamint
mérhetetlen anyagi károkat okozhat.
Áramütés kockázata!
Fontos Információ!
Itt magyarázó információkat és tippeket
talál, amelyek segítik Önt ezen készülék
optimális használatában.
Olvassa el a kezelési útmutatót!
Ne takarja le a készüléket!
A terméket ne a háztartási szeméttel
együtt ártalmatlanítsa, hanem a
helyi gyűjtőhelyen adja le az anyag
hasznosítására.
Hulladékszelektálás jelzése!
A csomagolás környezetbarát
ártalmatlanítása!
Védje a nedvességtől!
Csomagolási egység beállítása felül
Törékeny csomagolt áru
Ez a fogyasztásmérő készülék segít Önnek
a költségek minimalizálásában és egy
energiatakarékos otthon kialakításában. Méri
a feszültséget, az áramerősséget, frekvenciát,
teljesítményt, és ezek alapján kiszámolja az
energiafogyasztást. Túlterhelés esetén a készülék
azonnal gyelmeztető hangot ad. A készülék
előre betáplált egységárak alapján képes a
költség meghatározására.
Gyermekvédelemmel ellátott aljzat
Beépített újratölthető elem, áramszünet esetén
sem vesznek el a beállítások
• Költségszámítás