To Next PageTo Next Page
Need help?Do you have a question about the Delinia iD D80 S and is the answer not in the manual?
General| Material | Stainless steel |
|---|---|
| Type | Sink |
| Sink dimensions | 800 x 500 mm |
| Number of bowls | 1 |
| Minimum cabinet size | 50 cm |
Identifies product series and provides multilingual safety warnings.
Details the importance of secure furniture attachment to prevent tipping and injury.
Assembles the main cabinet structure and inserts the bottom panel.
Assembles the drawer box and attaches slides to the main cabinet body.
Attaches the corresponding slides to the drawer box assembly.
Illustrates specific screw types (P, T, O) for the D80 S model.
Secures drawer slides to the pre-drilled holes on the cabinet sides.
Guides the user on how to insert the assembled drawer into the cabinet.
Details fine-tuning the drawer position and alignment using specific mechanisms.
Explains final checks and how to release the drawer if needed.
Shows specific hole drilling patterns for cabinet configurations A and B.
Details specific hole drilling patterns for cabinet configurations C and D.
Illustrates cabinet configurations E and F including door opening angles.
Provides drilling and layout details for tall cabinet configurations G and H.
Shows drilling and layout details for tall cabinet configurations I and J.
Details drilling and door angle considerations for wide cabinet configurations K and L.
Advises users to keep the manual for future reference and careful reading.
