Delixi LXK3 Series User Manual

● Hit head structure type and basic data
Hit head structure type and basic data
Product Model
Hit head structure type
Operating
force
Aciton
stroke or
angle
Reset force
Stroke
difference
Full stroke
LXK3 − 20
H
S
/Z
Plunger type
≤30N
(1.7-2.2)
mm
≥5Н
≤1.2mm
≤6.0mm
LXK3 − 20
H
S
/L
Roller plunger type
LXK3 − 20
H
S
/B
Roller rotating arm type
≤0.24 N·m
18-24°
≥0.06 N·m
≤ 15°
≤ 60°
LXK3 − 20
H
S
/T
Adjustable roller rotating
arm type
LXK3 − 20
H
S
/J
Adjustable metal rocker
type
LXK3 − 20
H
S
/D
Elastic rocker type
≤0.22 N·m
≥ 0.03 N·m
LXK3 − 20
H
S
/H1
"Fork" type, with left wheel
in front and right wheel at
rear
≤0.2 N·m
70-80°
--
40-60°
≤ 90°
LXK3 − 20
H
S
/H2
"Fork" type, with right
wheel in front and left
wheel at rear
LXK3 − 20
H
S
/H3
Universal type
LXK3 − 20
H
S
/W
Hit head structure type
≤0.038 N·m
12-20°
≥0.015 N·m
≤ 8°
--
Normal Operation, Installation and Transport Conditions
●Normal operation and installation conditions
(1) The ambient air temperature is not higher than +40℃, and is not below -5℃; the average value within 24
hours does not exceed +35℃;
(2) The altitude of the installation site does not exceed 2000m;
(3) The relative humidity of the atmosphere does not exceed 50% at the maximum ambient temperature of +40℃,
and a higher relative humidity is allowed at lower temperatures, such as 90% at 20℃. Special measures shall be
taken for condensation occasionally generated due to temperature changes.
(4) The product can be installed in any installation angle;
(5) Installed in a place where there is shock vibration for obvious shaking without rain or snow erosion;
(6) Pollution level: Level 3;
(7) Installation category: Class II;
(8) Rated impulse withstand voltage: 6kV;
(9) Protection grade: IP65 after installation.

Delixi LXK3 Series Specifications

General

Brand	Delixi
Model	LXK3 Series
Category	Switch
Language	English