Dell EMC D13U - Set up your OptiPlex 7090 Ultra; Installing the device on a fixed stand

To Next Page

To Previous Page

Set up your OptiPlex 7090 Ultra

Topics:

• Installing the device on a fixed stand

•

Installing the device on a Pro 1 height-adjustable stand

• Installing device on offset VESA mount

• Installing the device on a Pro 2 height-adjustable stand

• Installing device on Wall Mount

Installing the device on a fixed stand

1. Align and insert the slots on the fixed stand into the tab on the stand base.

2. Lift and tilt the stand base.

3. Tighten the captive screw to secure the stand to the base.

4. Slide the release latch on the stand, until you hear a click, to release the stand cover.

5. Slide and lift the cover to release it from the stand.

Set up your OptiPlex 7090 Ultra 5

Other manuals for Dell EMC D13U