Purpose:
To specify whether the printer outputs PDL data, which is not supported by the printer, as text when the printer receives
it. Text data is printed on A4 or Letter size paper.
Values:
On* Prints the received data as text data.
Off Does not print the received data.
Banner Sheet
Purpose:
To specify the position of banner sheet, and also specify the tray in which the banner sheet is loaded. This feature is
available for the PCL driver but is not available for the PS driver.
Values:
Banner Sheet Insert Position
Off* Does not print the banner sheet.
Front Prints on the beginning of document.
Back Prints on the end of document.
Front & Back Prints on both beginning and end of document.
Banner Sheet Specify Tray
Tray 1* The banner sheet is loaded in tray 1.
Tray 2*
1
The banner sheet is loaded in tray 2.
MPF The banner sheet is loaded in multipurpose feeder (MPF).
*1 Only displayed when an optional 550 sheet feeder is installed on the printer.
RAM Disk
Purpose:
To allocate memory to the RAM disk file system for the Secure Print and Proof Print features. The change becomes
effective after the printer is turned off and then on again.
Values:
Disable*
Does not allocate memory to the RAM disk file system. Secure Print and Proof Print jobs will abort and be
recorded to the job log.
50-
500MB*1
Specifies the amount of memory to allocate to the RAM disk file system. (50 MB step)
50-
1000MB*2
*1 Only displayed when the optional 512 MB memory is installed.
*2 Only displayed when the optional 1024 MB memory is installed.
NOTE: The RAM Disk menu is displayed only when 512 MB or more memory is installed on the printer.
NOTE: Restart your printer when you change the settings for the RAM Disk menu.
Substitute Tray
Purpose:
Specifies whether or not to use another size paper when the paper that is loaded in the specified tray does not match the
paper size settings for the current job.
To Next Page
Loading...
Need help?
General
