Product Safety, EMC & Environmental Datasheet
Page 4
IX. PERFORMANCE DATA
Energy Consumption
4
Service Level Energy Consumption (Wattage) Description of Service Level
*Printing 600 The system is printing
Ready Mode 130
The system is in a ready mode waiting for
instruction
Sleep 1 75
The system is in a low-power sleep mode
( setting range: 15 – 45 minutes)
Sleep 2 7
The system is in a low-power sleep mode
( setting range: 30 – 90 minutes)
Off 0.4
c power source
The system is turned off but is still
onnected to its AC
*Maximum Energy Consumption results are based solely upon the laboratory testing of the System Configuration listed above.
Declared Noise Emissions in accordance with ISO 9296 (tested in accordance with ISO 7779)
Service Level
Sound Power
(L
WAd
, bels)
(1 bel=10 decibels, re 10
-12
Watts)
Sound Pressure
Bystander Position
(L
pAm
, decibels) (re 2x10
-5
Pa)
Printing 7.17 60.2
Idle 4.58 30.8
4
This document is informational only and reflects laboratory performance. Your product may perform differently, depending on the software, components and
peripherals you ordered. Accordingly, the customer should not rely upon this information in making decisions about electrical tolerances or otherwise. No warranty
as to accuracy or completeness is expressed or implied. The information in this document may change without notice; please note the revision number on the last
page.