Reference Information
7-21
Service Manual
7.5.7 Installing an Output Expander
To increase the paper output capacity of your printer, install an Output Expander. An Output
Expander holds 650 sheets of plain paper.
1. Power off the printer off and unplug all cables
from the printer.
2. Face the back of the printer as shown, grasp the
dummy cover,and remove it.
3. Remove the packing tape from the Output
Expander.
4. Locate the Output Expander alignment pins and
insertion slots on the printer. Align the pins on
the output expander with the slots on the printer
and place the Output Expander on top.
5. Grasp the Output Expander stacker as shown.
To Next Page
Loading...
Need help?
General