Why is available memory decreasing on Dell Desktop?
If your Dell Desktop shows 'DECREASING AVAILABLE MEMORY', it may indicate that one or more memory modules are faulty or not properly seated. Try reinstalling the memory modules, and if the problem continues, replace them.
How to resolve 'Not Enough Memory or Resources' error on my Dell D15S Desktop?
You have too many programs open. Close all windows and open the program that you want to use.
What to do if my Dell D15S displays 'Time-of-Day Clock Stopped'?
Connect your computer to an electrical outlet to charge the battery.
What does it mean if my Dell Desktop displays 'System fan failure'?
This message indicates that the system fan has failed.
What does it mean if my Dell D15S displays 'CPU fan failure'?
This message indicates that the CPU fan has failed.
Why does my Dell Desktop say 'CMOS checksum error'?
This message indicates that the RTC is reset, and the BIOS Setup default has been loaded.
How to resolve a 'BIOS Checksum Failure' on a Dell Desktop?
If your Dell Desktop displays a 'BIOS Checksum Failure', the system is in Recovery Mode. Flash the latest BIOS version. If the problem continues, replace the motherboard.
What to do if my Dell Desktop displays 'Memory Allocation Error'?
If your Dell Desktop displays 'Memory Allocation Error', the software you are attempting to run is conflicting with the operating system, another program, or a utility. Shut down the computer, wait for 30 seconds, and then restart it. Run the program again. If the error message still appears, see the software documentation.
What does memory address line failure mean on Dell Desktop?
If your Dell Desktop displays 'MEMORY ADDRESS LINE FAILURE AT ADDRESS, READ VALUE EXPECTING VALUE', it suggests that a memory module may be faulty or improperly seated. Reinstall the memory module, or replace it if necessary.
What to do if my Dell Desktop displays 'Time-of-Day Not Set'?
If your Dell Desktop displays 'Time-of-Day Not Set', the time or date stored in the system setup program does not match the system clock. Correct the settings for the Date and Time options.
To Next Page
General
