Solving Problems 45
Network Problems
Power Problems
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions on page 9.
CHECK FOR INTERRUPT REQUEST CONFLICTS — See page 63.
CHECK THE NETWORK CABLE CONNECTOR — Ensure that the network cable is connected
as shown on page 23.
CHECK THE NETWORK LIGHTS ON THE BACK OF THE COMPUTER — No light indicates
that there is no network communication. Try replacing the network cable.
RESTART THE COMPUTER AND TRY TO LOG ON TO THE NETWORK AGAIN
CHECK YOUR NETWORK SETTINGS — Contact your network administrator or the person who
set up your network to verify that your network settings are correct and that the network is
functioning.
CHECK FOR INTERRUPT REQUEST CONFLICTS — See page 63.
ADJUST THE POWER PROPERTIES — Your computer may be in standby or hibernate mode.
For information on power conservation modes, see the Tel l Me H ow help file, or search for the
keyword standby or hibernate in Windows
®
Help. To access help files, see page 34.
g
g
To Next Page
Loading...
