Dell Dimension 5000 - Installing a Floppy Drive


3. Disconnect the power and data cables from the back of the floppy drive.

4. Remove the floppy drive by sliding and holding the drive latch release downward. Then, slide the drive out of the computer.

Installing a Floppy Drive
1
power cable
2
data cable
NOTE: If you are installing a PCI Express x16 card, this card may cover the floppy-drive connectors. Remove this card before connecting the floppy-drive
cables.
1
sliding plate lever
2
sliding plate
3
floppy drive
NOTE: In the event the replacement or new floppy drive does not have the shoulder screws, use the screws located within the drive panel insert.