EasyManua.ls Logo

Dell DR4100 - Page 24

Dell DR4100
41 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
24 DR4100 Best Practice Guide | April 2014
d. Issue the following command to verify all changes have been properly made:
network!show!
4. Dedicate traffic to interfaces in the following manner:
Management - bond0
Backup Traffic -bond1
Replication- eth1
!
a. Dedicate bond0 to management traffic using the following commands:
system --mgmt_traffic --add --type < Webserver|Telnet| > --interface <bond(0-N) | eth(0-N) | lo#>
b. Dedicate bond1 to CIFS and NFS backup traffic using the following commands:
system --backup_traffic --add --type < NFS|CIFS|OST|RDS> --interface <bond(0-N) | eth(0-N) | lo#>
Example
administrator@DR1 > network --create_eth --nwif eth1 --static --ip 10.250.243.222 --
netmask 255.255.252.0 -- name DR1-replication --restart
WARNING: During network restart a loss of connection may occur and a relogin may be
necessary. Password required to proceed.
Please enter the administrator password:
Interface operation successful. Network restart will now be done.
Restarting network...
Shutting down interface bond0: [ OK ]
Shutting down interface bond1: [ OK ]
Shutting down loopback interface: [ OK ]
Bringing up loopback interface: [ OK ]
Bringing up interface bond0:Determining IP information for bond0... done. [ OK ]
Bringing up interface bond1: [ OK ]
Bringing up interface eth1: [ OK ]
Updating DNS entry for swsys-231.ocarina.local to 10.250.242.173 ..
Skipping DNS Update 10.250.240.4: IP already updated.
Example
administrator@DR1 > system --mgmt_traffic --add --type Webserver --interface bond0
Successfully added application webserver.
Restarting webserver service ... done.
administrator@DR1 > system --mgmt_traffic --add --type Telnet --interface bond0
Successfully added application telnet.
Restarting telnet service ... done.

Other manuals for Dell DR4100

Related product manuals