34 DR4100 Best Practice Guide | April 2014
6.3.1.6 Scenario 4: Multiple appliance replication
Jose has one DR4100 appliance located at his Seattle site and two DR4100s located at his Lansing site. He wants to
replicate data from his Seattle site (Seattle1) to his Lansing site (Lansing1). He would also like to replicate data backed
up at Lansing1 to another site, Lansing2.
Jose will need to do the following to accomplish his goals:
• Create bonds on the appropriate interfaces on all three appliances.
• Add replication to the designated interfaces.
• Establish network routes between the DR appliances.
The appliances will be configured as follows:
• Seattle1: 2x 10GB interfaces in bond0 and 2x 1GB interfaces in bond1
• Lannsing1: 2x 10GB interfaces in bond0 and 2x 1GB interfaces in bond1
• Lansing2: 2x 10GB interfaces in bond0
Figure 6 Scenario 4 topology
To Next Page
Loading...
