EasyManua.ls Logo

Dell E39S001 - Page 57

Dell E39S001
173 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Option Description
Table 42. UEFI iSCSI Settings screen details
Option Description
iSCSI Initiator Name Specifies the name of the iSCSI initiator in IQN
format.
iSCSI Device1 Enables or disables the iSCSI device. When disabled,
a UEFI boot option is created for the iSCSI device
automatically. This is set to by default.
iSCSI Device1 Settings Enables you to control the configuration of the iSCSI
device.
UEFI iSCSI
Settings
Enables you to control the configuration of the iSCSI device.
Table 43. UEFI iSCSI Settings screen details
Option Description
Connection 1 Specifies the name of the iSCSI initiator in IQN
format.
Connection 2 Enables or disables the iSCSI device. When disabled,
a UEFI boot option is created for the iSCSI device
automatically. This is set to Disabled by default.
Connection 1 Settings Enables you to control the configuration of the iSCSI
device.
Connection 2 Settings Enables you to control the configuration of the iSCSI
device.
Connection order
TLS
Authentication
Configuration
View and/or modify this device's boot TLS authentication mode. None means the HTTP server and the client will
not authenticate each other for this boot. One way means the HTTP server will be authenticated by the client,
while the client will not be authenticated by the server. This option is set to None by default.
Integrated Devices
You can use the Integrated Devices screen to view and configure the settings of all integrated devices including the video controller,
integrated RAID controller, and the USB ports.
Viewing Integrated Devices
To view the Integrated Devices screen, perform the following steps:
Steps
1. Power on, or restart your system.
2. Press F2 immediately after you see the following message:
F2 = System Setup
NOTE:
If your operating system begins to load before you press F2, wait for the system to finish booting, and then
restart your system and try again.
3. On the System Setup Main Menu screen, click System BIOS.
4. On the System BIOS screen, click Integrated Devices.
Pre-operating system management applications
57

Table of Contents

Related product manuals