Need help?Do you have a question about the Dell E28S Series and is the answer not in the manual?
Information on supported Intel Xeon processors for the PowerEdge R430.
Specifications for the 450 W AC and 550 W AC power supply units.
Step-by-step procedure for unpacking and setting up the server.
Information on configuring the Integrated Dell Remote Access Controller (iDRAC).
How to access and use the System Setup utility for BIOS and iDRAC settings.
Essential safety precautions to follow before performing any system component maintenance.
Procedures and guidelines to follow before opening the server.
Procedures for removing and installing 2.5-inch and 3.5-inch hard drives and carriers.
Instructions for removing and installing processors and their associated heat sinks.
Details on installing and removing 450 W AC and 550 W AC power supply units.
Procedures for removing and installing the system board (motherboard).
How to run built-in diagnostics for hardware testing and issue identification.
To Next Page
General