Table 13. 10 X 2.5 inch drive appliance with 3 PCIe expansion slot
Item Ports, panels, or slots Icon Description
1 PCIe expansion card
slot(s)
N/A
The expansion slot(s) enable you to connect PCI Express
expansion cards. For more information on the expansion cards that
are supported on your appliance, see the Expansion card guidelines
section.
2 Power supply unit (2) N/A For more information about the PSU configurations, see the
Technical Specifications section.
3 NIC port (4) The NIC ports that are integrated on the network daughter card
(NDC) provide network connectivity. For more information about
the supported configurations, see the Technical specifications
section.
4 USB 3.0 (2) The USB ports are 9-pin and 3.0-compliant. These ports enable you
to connect USB devices to the appliance.
5 VGA port Enables you to connect a display device to the appliance. For more
information, see the Technical Specifications section.
6 Serial port Enables you to connect a serial device to the appliance. For more
information, see the Technical Specifications section.
7 iDRAC9 Enterprise port Enables you to remotely access iDRAC. For more information, see
the iDRAC User’s Guide at Dell.com/idracmanuals.
8 CMA power port N/A The Cable Management Arm (CMA) power port enables you to
connect to the CMA.
9 Appliance identification
button
The appliance Identification (ID) button is available on the front
and back of the appliances. Press the button to identify a appliance
in a rack by turning on the appliance ID button. You can also use
the appliance ID button to reset iDRAC and to access BIOS using
the step through mode.
Overview 15
To Next Page
Loading...
