Dell G2210 - Page 22


Back
Press to go back to the main menu.

Horizontal Po
sition
Use the and buttons to adjust image left and right. Minimum is '0' (-). Maximum is '100' (+).
NOTE: WhenusingaDVIsource,theHorizontalPositionsettingisnotavailable.

Vertical Posit
ion
Use the and buttons to adjust image up and down. Minimum is '0' (-). Maximum is '100' (+).
NOTE: WhenusingaDVIsource,theVerticalPositionsettingisnotavailable.

Sharpness
This feature can make the image look sharper or softer. Use or to adjust the sharpness from '0' to '100'.

Pixel Clock
The Phase and Pixel Clock adjustments allow you to adjust your monitor to your preference.
Use the and buttons to adjust for best image quality.

Phase
IfsatisfactoryresultsarenotobtainedusingthePhaseadjustment,usethePixelClock(coarse)adjustmentandthenusePhase(fine),again.

NOTE: Pixel Clock and Phase Adjustments are only available for "VGA" input.

Dynamic
Contrast
The Dynamic Contrast adjustment helps the user to get a higher contrast if you choose Game preset, Movie Preset, Sports Preset and Nature Preset.
(Brightness control is disabled while in Dynamic Contrast mode and will be grayed out.)
Use the button to enable the Dynamic Contrast adjustment.
Use the button to disable the Dynamic Contrast adjustment.
NOTE: Dynamic Contrast is not available (greyed out) in Energy Smart Plus and Energy Smart modes.

Display Reset
Reset the image to the original factory setting.

Exit Menu
Press to exit the OSD main menu.
OTHER
SETTINGS


