Removing the Power-Adapter
Port
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer. After working inside your
computer, follow the instructions in After Working Inside Your
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Prerequisites
1 Remove the base cover.
2 Remove the battery.
3 Remove the system board.
Procedure
1 Peel off the Mylar from the palmrest and keyboard assembly to access
the power-adapter port cable.
2 Remove the screw that secures the power-adapter port to the palmrest
and keyboard assembly.
51
To Next Page
Loading...
