1 securing tabs (4)
2 keyboard connector
3 interface connector
4 M2 x 3-mm screws (4)
2. Insert the four securing tabs on the keyboard into their respective slots in the
palm rest, and lower the keyboard into the computer base.
Ensure that all four securing tabs are engaged before trying to completely seat
the keyboard.
3. Replace the four M2 x 3-mm keyboard screws.
4. To replace the hinge cover, first insert the left side of the hinge cover into the
notches. Snap down the hinge cover, and ensure that it is flush with the palm
rest.
file:///F|/Service%20Manuals/Dell/Inspiron/1100-5100-5150/keyboard.htm (5 of 6) [2/28/2004 6:46:39 AM]
To Next Page
Loading...
