Installing the Speakers
1. Slide the speakers down into the base plastics.
NOTICE: Ensure that the speaker cables are under or between their routing
clips.
NOTE: Speakers face out in the base plastics
holders.
NOTE: The right speaker cable is longer than the left speaker
cable.
2. Route the speaker cables under or between their routing clips.
3. Connect the speaker connector to the system board.
Back to Contents Page
file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LAP...ecked%20ok/Inspiron/1150/1150%20SM/speakers.htm (3 of 3)6/21/2004 12:41:10 AM
To Next Page
Loading...
