9 Peel off the tape that secures the display cable to the display hinge.
1 wireless card 2 tapes (2)
3 routing guide 4 antenna cables (2)
5 screws (2) 6 display-cable bracket
7 display cable 8 Windows-button board
cable
9 latch
10 Turn the computer over and open the display to 180-degree angle.
CAUTION: Place the computer on a soft and clean surface to avoid
scratching the display.
11 Place the computer face down on a clean and flat surface.
12 Remove the screws that secure the display assembly to the computer
base.
63
To Next Page
Loading...
