Dell Inspiron 1501 - Setting Up a Network; Physically Connecting to a Network or Broadband Modem

Setting Up a Network 53
Setting Up a Network
Physically Connecting to a Network or Broadband Modem
Before you connect your computer to a network that is not wireless, the computer must have a
network adapter installed and a network cable connected to it.
To connect a network cable:
1
Connect the network cable to the network adapter connector on the back of your computer.
NOTE: Insert the cable connector until it clicks into place, and then gently pull the cable to ensure that it is
securely attached.
2 Connect the other end of the network cable to a network connection device or a network wall
connector.
NOTICE: Do not use a network cable with a telephone wall connector.