36 | mSATA Card (Optional)
Procedure
1 Remove the screw that secures the mSATA card to the
system-board connector.
2 Lift the mSATA card out of the system-board connector.
CAUTION: When the mSATA card is not in the computer, store it in protective
antistatic packaging. For more information,
see "Protecting Against Electrostatic Discharge" in the safety information that
shipped with your computer.
1 mSATA card 2 screw
3 system-board connector
book.book Page 36 Monday, October 8, 2012 4:17 PM
To Next Page
Loading...
