76 | System Board
Procedure
NOTE: Your computer’s Service Tag is stored in the system board.
You must enter the Service Tag in the BIOS after you replace the
system board.
NOTE: Before disconnecting the cables from the system board, note the location
of the connectors so that you can reconnect them correctly after you replace the
system-board assembly.
1 Close the display and turn the computer over.
2 Disconnect the subwoofer cable from the system-board connector.
1 subwoofer cable routing 2 subwoofer cable
book.book Page 76 Monday, October 8, 2012 4:17 PM
To Next Page
Loading...
