Table 4. System setup options—Main menu (continued)
Main
First HDD Displays the primary hard disk.
AC Adapter Type Displays the type of AC adapter.
System Memory Displays the size of memory installed.
Memory Speed Displays the speed of memory.
Keyboard Type Displays the type of keyboard installed on the computer.
Table 5. System setup options—Advance menu
Advance
Virtualization Enables or disables the Virtualization technology.
Default: Enabled
VT for Direct I/O Enables or disables Virtualization technology for direct I/O.
Default: Enabled
Integrated NIC Enables or disables the Integrated NIC.
Default: Enabled
SATA Operation Allows you to configure the operating mode of the integrated
SATA hard drive controller.
Default: AHCI
Adapter Warnings Allows you to choose if the computer should display warning
messages when you use AC adapters that are not supported
by your computer.
Default: Enabled
Camera Enables or disables the camera.
Default: Enabled
USB Configuration
Rear USB Ports Allows you to enable or disable the front USB ports.
Default: Enabled
Sides USB Ports Allows you to enable or disable the USB ports on the sides.
Default: Enabled
IPv4 HTTP Support Displays the IPv4 support status.
Default: Disabled
IPv6 HTTP Support Displays the IPv6 support status.
Default: Disabled
Power Option
Wake Up by Integrated LAN/WLAN Enables or disables wake up the computer through Integrated
LAN or Wireless LAN.
Default: Disabled
AC Recovery Sets what action the computer takes when power is
restored.
Default: Power Off
Deep Sleep Control Enables you to define the controls when Deep Sleep is
enabled.
72 System setup
To Next Page
Loading...
