Removing the Palm Rest | 43
Removing the Palm Rest
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
"Before Working Inside
Your Computer" on page 7. After working inside your computer, follow the
instructions in "After Working Inside Your Computer" on page 9.
For more safety best practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
Prerequisites
1 Remove the base cover. See "Removing the Base Cover" on page 10.
2 Remove the battery. See "Removing the Battery" on page 12.
3 Remove the hard drive. See "Removing the Hard Drive" on page 17.
4 Remove the speakers. See "Removing the Speakers" on page 23.
5 Remove the fan. See "Removing the Fan" on page 29.
6 Remove the I/O board. See "Removing the I/O Board" on page 27.
7 Remove the power-adapter port. See "Removing the Power-Adapter Port" on
page 33.
To Next Page
Loading...
