Removing the wireless card
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working
inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Prerequisites
• Procedure
Prerequisites
1. Remove the base cover.
2. Remove the battery.
Procedure
1. Remove the screw (M2x3) that secures the wireless card to the palm-rest and keyboard assembly.
2. Lift the wireless-card bracket from the wireless card.
3. Disconnect the antenna cables from the wireless card.
4. Slide the wireless card from the wireless-card slot on the system board.
Figure 47. Removing the wireless card
1.
M2x3 screw 2. wireless-card bracket
15
Removing the wireless card 29
To Next Page
Loading...
