Table 13. System setup options—Advanced menu
Advanced
PowerNow! Enable
Enables or disables the Intel(R) SpeedStep(tm) mode of the
processor.
Default: Enabled
Virtualization Allows you to enable or disable the Virtualization technology.
Default: Enabled
USB Emulation Allows you to enable or disable the USB emulation feature.
This feature defines how the BIOS, in the absence of a USB-
aware operating system, handles USB devices. USB
emulation is always enabled during POST.
NOTE: You cannot boot any type of USB device (floppy,
hard drive, or memory key) when this option is off.
Default: Enabled
USB Wake Support Allows you to enable USB devices to wake the computer
from standby or to disable the USB wake support feature.
NOTE: If USB PowerShare is enabled, a device
connected to the USB PowerShare connector may not
wake the computer.
Default: Disabled
SATA Operation Allows you to configure the operating mode of the integrated
SATA hard drive controller.
Default: AHCI
Adapter Warnings Allows you to choose if the computer should display warning
messages when you use AC adapters that are not supported
by your computer.
Default: Enabled
Function Key Behavior Allows you to set function key or multimedia key as the
default function key behavior.
Default: Multimedia key
Battery Health Displays the battery health.
Miscellaneous Devices
USB Debug Enable or disable USB debug.
Default: Disabled
BIOS Recovery from Hard Drive Enable or disable BIOS recovery from hard drive.
Default: Enabled
Battery Charge Configuration Set the battery charge settings with a preselected custom
charge start and stop.
Default: Adaptive
Advanced Battery Charge Configuration Enable Advance Battery Charge Configuration from the
beginning of the day to a specified work period.
Default: Disabled
SupportAssist System Resolution
Auto OS Recovery Threshold Controls the automatic boot flow for SupportAssist System
Resolution Console and for the Dell OS Recovery tool.
80 System setup
To Next Page
Loading...
