156 Removing and Installing Parts
NOTE: The location/connectors may vary depending on your system type. For more
information, see "System Board Components" on page 110.
9
Replace the bezel (see "Replacing the Bezel" on page 137).
10
Replace the computer cover (see "Replacing the Computer Cover" on
page 176).
NOTICE: To connect a network cable, first plug the cable into the network device
and then plug it into the computer.
1 CD/DVD drive 2 data cable 3 power cable
4 system board
connector
5 screw holes in the
CD/DVD drive bay
6 custom screws (2)
1
2
4
6
5
3
book.book Page 156 Monday, October 6, 2008 11:28 AM
To Next Page
Loading...
