158 Removing and Installing Parts
9
Connect the data cable to the system board connector on the system
board.
10
Check all cable connections, and fold cables out of the way to avoid
blocking airflow between the fan and cooling vents.
11
Replace and tighten the two screws securing the CD/DVD drive.
12
Replace the bezel (see "Replacing the Bezel" on page 137).
13
Replace the computer cover (see "Replacing the Computer Cover" on
page 176).
1 CD/DVD drive 2 second CD/DVD drive 3 data cable
4 power cable 5 system board connector 6 screw holes in the
CD/DVD drive bay
1
2
3
4
5
6
book.book Page 158 Monday, October 6, 2008 11:28 AM
To Next Page
Loading...
