Dell Inspiron 535 - Removing the Front Bezel; Replacing the Front Bezel

Back to Contents Page
 Front Bezel
Dell™Inspiron™535/537/545/546ServiceManual
Removing the Front Bezel
Replacing the Front Bezel
Removing the Front Bezel

1. Follow the procedures in Before You Begin.

2. Remove the computer cover (see Removing the Computer Cover).

3. Grasp and lift the bezel grips one at a time to release it from the front panel.

4. Rotate and pull the bezel away from the front of the computer to release the bezel clamps from the bezel inserts.

5. Set aside the bezel in a secure location.
Replacing the Front Bezel

1. Align and insert the bezel clamps in the bezel inserts.

2. Rotate the bezel towards the computer until the bezel grips snap into place.

3. Replace the computer cover (see Replacing the Computer Cover).
Back to Contents Page

WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
WARNING: To guard against electrical shock, always unplug your computer from the electrical outlet before removing the cover.
WARNING: Do not operate your equipment with any cover(s) (including computer covers, bezels, filler brackets, front-panel inserts, etc.)
removed.
1
bezel
2
bezel grips (3)
3
bezel clamps (3)
4
bezel inserts (3)