122 Adding and Replacing Parts
www.dell.com | support.dell.com
8 If a Mini PCI card is not already installed, go to step 9. If you are
replacing a Mini PCI card, remove the existing card:
a Disconnect the Mini PCI card from any attached cables.
b Release the Mini PCI card by spreading the metal securing tabs
until the card pops up slightly.
c Lift the Mini PCI card out of its connector.
9 Align the new Mini PCI card with the connector at a 45-degree angle,
and press the Mini PCI card into the connector.
10 Connect the antenna cables from the Mini PCI card to the antenna
connectors on the computer.
NOTICE: The connectors are keyed for correct insertion; do not force the
connections.
To Next Page
Loading...
