60 Using Batteries and Module Bay Devices
www.dell.com | support.dell.com
6 Insert the new device into the bay, push the device until you feel a
click, and push the device latch release in so that it is flush with the
computer. Windows XP automatically recognizes the new device.
7 If necessary, enter your password to unlock your computer.
If the Device Screw Is Installed
1 Double-click the Safely Remove Hardware icon on the taskbar.
2 Click the device you want to eject.
3 If the computer is connected to a docking device (docked), undock it.
See the documentation that came with your docking device for
instructions.
NOTICE: To prevent damage to devices, place them in a safe, dry place when
they are not installed in the computer. Avoid pressing down on them or placing
heavy objects on top of them.
4
Use a #1 Phillips screwdriver to remove the device screw from the
bottom of the computer.
device latch release
To Next Page
Loading...
