60
Solving Problems
If the power light is breathing white — The
computer is in standby mode or the display
may not be responding.
Press a key on the keyboard, move the •
connected mouse or a finger on the touch
pad, or press the power button to resume
normal operation.
If the display is not responding, press the •
power button until the computer turns off
and then turn it back on.
If the problem persists, contact Dell (see •
“Contacting Dell” on page 84).
If you encounter interference that hinders
reception on your computer — An unwanted
signal is creating interference by interrupting
or blocking other signals. Some possible
causes of interference are:
Power, keyboard, and mouse extension •
cables.
Too many devices connected to a power •
strip.
Multiple power strips connected to the •
same electrical outlet.
To Next Page
Loading...
