Option Description
Miscellaneous devices
Allows you to enable or disable various on board devices.
• Enable Camera—Default
• Enable Secure Digital (SD) Card
• Secure Digital (SD) Card Boot - Disabled
• Secure Digital Card (SD) Read-Only Mode - Disabled
MAC Address Pass-Through This feature replaces the external NIC MAC address (in a
supported dock or dongle) with the selected MAC address from
the system. The options are
• System Unique MAC Address— Default
• Disabled
Video screen options
Table 24. Video
Option Description
LCD Brightness
Allows you to set the display brightness depending upon the power
source. On Battery(100% is default) and On AC (100 % is default).
Privacy Screen
This option Enables or Disables the Privacy Screen if the Panel
supports this feature. The options are:
• Disabled: When Disabled the privacy screen is not applied to
the embedded display panel.
• Enabled — Default: When enabled, the privacy screen is
applied to the embedded display panel and can be toggled
between public mode and privacy mode using the Fn+F9 key
combination on the embedded keyboard.
• Always On: When always on the privacy screen is always on
and cannot be turned off by the user.
NOTE: This option is present if the display supports e-
Privacy panel.
Security
Table 25. Security
Option Description
Admin Password
Allows you to set, change, or delete the administrator(admin) password.
The entries to set password are:
• Enter the old password:
• Enter the new password:
• Confirm new password:
Click OK once you set the password.
NOTE: For the first time login, "Enter the old password:" field is marked to "Not set".
Hence, password has to be set for the first time you login and then you can change or
delete the password.
System setup 27
To Next Page
Loading...
