Dell OptiPlex 3010 - Page 24

DELL™ OPTIPLEX™ 3010 TECHNICAL GUIDEBOOK —FINAL
24
COMMUNICATIONS – SERIAL / PARALLEL PORT PCIE ADD-IN CARD
NO T E : M T sup por t s full h e i ght ( F H) c ard , a n d DT a n d S FF s uppo rt s l o w p ro  l e (LP) d o n gle.
SERIAL / PARALLEL PORT PCIE ADD-IN CARD
MT DT SFF
Connector Type RS-232 and IEEE1284
Data Rates supported
50bps ~115.2Kbps(Serial)&Maximum 1.8MBp(Parallel)
Controller Details
Controller bus architecture (example PCIe 1.0a x1) PCI Express Spec 2.0, Single-Lane (x1)
Driver Support
Microsoft Client XP/Vista/7 (X86/X64)
Microsoft Server 2000/2003/2008/2008 R2 (X86/X64)
Microsoft Embedded XP Embedded/POS Ready 2009/
Embedded System 2009
Linux 2.4.x/2.6.x/3.x
DOS
Full height Serial / Parallel add-in card Optional
Environment
Operation Temperature 0 to 60°C (32 to 140°F)
Operation Humidity 5 to 95% RH
Storage Temperature -20 to 85°C (-4 to 185°F)
LOW PROFILE PARALLEL PORT PCIE ADD-IN CARD
MT DT SFF
Connector Type IEEE1284
Data Rates supported Maximum 1.8MBp
Controller Details
Controller bus architecture (example PCIe 1.0a x1) PCI Express Spec 2.0, Single-Lane (x1)
Driver Support
Microsoft Client XP/Vista/7 (X86/X64)
Microsoft Server 2000/2003/2008/2008R2 (X86/X64)
Microsoft Embedded XP Embedded/POS Ready 2009/
Embedded System 2009
Linux 2.4.x/2.6.x/3.x
DOS
Low Prole Parallel add-in card Optional
Environment
Operation Temperature 0 to 60°C (32 to 140°F)
Operation Humidity 5 to 95% RH
Storage Temperature -20 to 85°C (-4 to 185°F)