What to do if my Dell OptiPlex 5080 Small Form Factor Desktop has Intel ME (Management Engine) time-out error?
Timeout waiting on ME to reply to HECI message. If the problem persists, replace the system board.
What to do if my Dell OptiPlex 5080 Small Form Factor has a BIOS recovery image not found error?
Flash the latest BIOS version. If the problem persists, replace the system board.
What causes power rail failure on Dell Desktop?
If your Dell Desktop experiences a power rail failure, it means that EC ran into power sequencing failure. If the problem persists, replace the system board.
What to do if auxiliary device failure on Dell Desktop?
If your Dell Desktop experiences an auxiliary device failure, the touchpad or external mouse may be faulty. For an external mouse, check the cable connection. Enable the Pointing Device option in the System Setup program.
What does no timer tick interrupt mean on Dell OptiPlex 5080 Small Form Factor?
If your Dell Desktop shows 'No timer tick interrupt', a chip on the system board may be malfunctioning. Run the System Set tests in Dell Diagnostics.
How to fix keyboard clock line failure on Dell OptiPlex 5080 Small Form Factor?
If your Dell Desktop displays 'KEYBOARD CLOCK LINE FAILURE', and you're using an external keyboard, check the cable connection. Run the Keyboard Controller test in Dell Diagnostics.
How to resolve 'The File Being Copied Is Too Large' error on Dell Desktop?
If your Dell Desktop displays the error 'The File Being Copied Is Too Large For The Destination Drive', the file you're trying to copy is too large to fit on the disk, or the disk is full. Try copying the file to a different disk or use a larger capacity disk.
What to do if my Dell OptiPlex 5080 Small Form Factor Desktop displays 'No Timer Tick Interrupt'?
If your Dell Desktop displays 'No Timer Tick Interrupt', a chip on the system board may be malfunctioning. Run the System Set tests in Dell Diagnostics.
What to do if my Dell Desktop has Flash corruption detected by SBIOS?
Flash corruption was detected by SBIOS. If the problem persists, replace the system board.
What to do if my Dell OptiPlex 5080 Small Form Factor Desktop displays 'Hard-Disk Drive Configuration Error'?
If your Dell Desktop displays a 'Hard-Disk Drive Configuration Error', the computer is unable to identify the drive type. Shut down the computer, remove the hard drive, and boot the computer from an optical drive. Then, shut down the computer again, reinstall the hard drive, and restart the computer. Run the Hard Disk Drive tests in Dell Diagnostics.
To Next Page
General