To Next Page
A
April DiazAug 17, 2025
How to fix WiFi connectivity issues on Dell OptiPlex 7060 Tower?
- Mmichelle46Aug 17, 2025
To resolve WiFi connectivity issues on your Dell Desktop, perform a WiFi power cycle procedure.
How to fix WiFi connectivity issues on Dell OptiPlex 7060 Tower?
To resolve WiFi connectivity issues on your Dell Desktop, perform a WiFi power cycle procedure.
What to do if shutdown failure on Dell Desktop?
If your Dell Desktop is failing to shut down, run the System Set tests in Dell Diagnostics. If the message reappears, further assistance may be required.
What to do if no boot device available on Dell OptiPlex 7060 Tower?
If you receive a 'No Boot Device Available' error on your Dell Desktop, ensure that the drive is installed, properly seated, and partitioned as a boot device.
What to do if operating system not found on Dell Desktop?
If the operating system is not found on your Dell Desktop, reinstall the operating system. If the problem continues after reinstalling, further assistance may be required.
How to fix auxiliary device failure on Dell Desktop?
If you are experiencing an auxiliary device failure on your Dell Desktop, the touchpad or external mouse may be faulty. If using an external mouse, check the cable connection. Also, enable the Pointing Device option in the System Setup program.
What causes 'Bad Command or File Name' error on Dell Desktop?
If you encounter a 'Bad Command or File Name' error on your Dell Desktop, ensure that you have spelled the command correctly, put spaces in the proper place, and used the correct path name.
How to fix hard-disk drive configuration error on Dell OptiPlex 7060 Tower?
To resolve a hard-disk drive configuration error on your Dell Desktop: 1. Shut down the computer. 2. Remove the hard drive. 3. Boot the computer from an optical drive. 4. Shut down the computer again. 5. Reinstall the hard drive. 6. Restart the computer. 7. Run the Hard Disk Drive tests in Dell Diagnostics.
What to do if time-of-day clock stopped on Dell OptiPlex 7060 Tower?
If the 'Time-of-Day Clock Stopped' on your Dell Desktop, connect your computer to an electrical outlet to charge the battery. If the problem persists, further assistance may be required.
How to troubleshoot unexpected interrupt in protected mode on Dell OptiPlex 7060 Tower?
If you get an 'Unexpected Interrupt in Protected Mode' error on your Dell Desktop, run the System Memory tests and the Keyboard Controller test in Dell Diagnostics. Further assistance may be required.
What to do if drive not ready on Dell Desktop?
If you are getting a 'Drive Not Ready' error on your Dell Desktop, install a hard drive in the hard drive bay.
General| Chipset | Intel Q370 |
|---|---|
| RAM | Up to 64GB DDR4 |
| Operating System | Windows 10 Pro |
| Form Factor | Tower |
| Processor | 8th Gen Intel Core i3/i5/i7 |
| Storage | Up to 2TB HDD |
| Graphics | Integrated Intel UHD Graphics 630 or optional discrete graphics |
| Ports (Front) | 2 x USB 3.1 Gen 1 |
| Ports (Rear) | 4 x USB 3.1 Gen 1, 2 x USB 2.0, 1 x RJ45, 1 x DisplayPort, 1 x HDMI |
| Expansion Slots | 1 x PCIe x16, 1 x PCIe x4, 1 x PCIe x1 |
| Power Supply | 260W |
| Dimensions | 175mm |
| Weight | Approximately 6.5 kg |
