Dell OptiPlex 7080 Micro - Power Adapter; Add-In Cards

The primary drive of your computer varies with the storage configuration. For computers:
• with a M.2 solid-state drive, the M.2 solid-state drive is the primary drive
• without a M.2 drive, the 2.5-inch hard-disk drive is the primary drive
Table 13. Storage specifications
Storage type Interface type Capacity
2.5-inch, 5400 RPM, hard-disk drive SATA 3.0 Up to 2 TB
2.5-inch, 7200 RPM, hard-disk drive SATA 3.0 Up to 1 TB
2.5-inch, 7200 RPM, FIPS Self Encrypting Opal 2.0, hard-
disk drive
SATA 3.0 500 GB
2.5-inch. solid-state drive SATA Class 20 512 GB
M.2 2230 solid-state drive Gen 3 PCIe x4 NVMe, Class 35 Up to 512 GB
M.2 2280 solid-state drive Gen 3 PCIe x4 NVMe, Class 40 Up to 2 TB
M.2 2280 Opal Self-Encrypting solid-state drive Gen 3 PCIe x4 NVMe, Class 40 Up to 1 TB
Power adapter
Table 14. Power adapter specifications
Description Values
Type
90 W (for 35 W CPU) 130 W (for 35 W CPU) 180 W (for 65 W CPU and
discrete graphics)
Diameter (connector)
4.5 mm x 2.9 mm 4.5 mm x 2.9 mm 7.4 mm x 5.1 mm
Input voltage
100 VAC x 240 VAC 100 VAC x 240 VAC 100 VAC x 240 VAC
Input frequency
50 Hz x 60 Hz 50 Hz x 60 Hz 50 Hz x 60 Hz
Input current (maximum)
1.5 A 2.5 A 2.34 A
Output current (continuous)
4.62 A 6.7 A 9.23 A
Rated output voltage
19.50 VDC 19.50 VDC 19.50 VDC
Temperature range:
Operating
0°C to 40°C (32°F to 104°F) 0°C to 40°C (32°F to 104°F) 0°C to 40°C (32°F to 104°F)
Storage
-40°C to 70°C (-40°F to
158°F)
-40°C to 70°C (-40°F to
158°F)
-40°C to 70°C (-40°F to
158°F)
Add-in cards
Table 15. Add-in cards
Add-in cards
USB Type-C 3.1 PCIe Card
2nd-gigabit NIC add-in card
Technical specifications 21