How to fix system board failure on Dell Desktop?
If your Dell Desktop experiences a system board failure, which includes BIOS corruption or ROM errors, flash the latest BIOS version. If the problem persists, replace the system board.
How to fix 'X:\ IS NOT ACCESSIBLE' on Dell OptiPlex 7080 Tower?
If your Dell Desktop displays 'X:\ IS NOT ACCESSIBLE. THE DEVICE IS NOT READY', insert a disk into the drive and try again.
How to fix 'Drive Not Ready' on Dell OptiPlex 7080 Tower Desktop?
If your Dell Desktop shows 'Drive Not Ready', install a hard drive in the hard drive bay.
How to fix 'Bad Command or File Name' on Dell Desktop?
If your Dell Desktop gives a 'Bad Command or File Name' error, ensure that you have spelled the command correctly, put spaces in the proper place, and used the correct path name.
What to do if no memory/RAM detected on Dell OptiPlex 7080 Tower?
To address a 'No memory/RAM detected' error on your Dell Desktop, first confirm that the memory module is installed properly. If the problem persists, replace the memory module.
How to correct 'Time-of-Day Not Set' on Dell OptiPlex 7080 Tower?
If your Dell Desktop displays 'Time-of-Day Not Set', correct the settings for the Date and Time options.
What to do if Dell OptiPlex 7080 Tower Desktop shows 'Time-of-Day Clock Stopped'?
If your Dell Desktop displays 'Time-of-Day Clock Stopped', connect your computer to an electrical outlet to charge the battery.
What to do if Dell OptiPlex 7080 Tower Desktop shows 'Time-of-Day Clock Lost Power'?
If your Dell Desktop displays 'Time-of-Day Clock Lost Power', connect your computer to an electrical outlet to charge the battery.
How to fix 'Invalid Configuration Information' on Dell Desktop?
If your Dell Desktop shows 'Invalid Configuration Information', correct the appropriate options in the system setup program.
How to fix keyboard controller failure on Dell Desktop?
If your Dell Desktop displays 'Keyboard Controller Failure', for external keyboards, check the cable connection. Also, restart the computer, and avoid touching the keyboard or the mouse during the boot routine.
To Next Page
General