Table 6. Memory configuration matrix (continued)
Configuration
Slot
DIMM1 DIMM2
64 GB DDR4 32 GB 32 GB
Intel Optane Memory H10 with Solid State Storage
(optional)
Intel Optane Memory technology utilizes 3D XPoint memory technology and functions as a non-volatile storage cache/
accelerator and/or storage device depending on the Intel Optane Memory installed in your computer.
Intel Optane Memory H10 with Solid State Storage functions as both a non-volatile storage cache/accelerator (enabling
enhanced read/write speeds for hard-drive storage) and a solid-state storage solution. It neither replaces nor adds to the
memory (RAM) installed on your computer.
Table 7. Intel Optane Memory H10 with Solid State Storage specifications
Description Values
Interface
PCIe 3 x4 NVMe
● One PCIe 3 x2 for Optane memory
● One PCIe 3 x2 for solid-state storage
Connector
M.2
Form factor 2280
Capacity (Intel Optane memory) Up to 32 GB
Capacity (solid-state storage) Up to 512 GB
NOTE: Intel Optane Memory H10 with Solid State Storage is supported on computers that meet the following requirements:
● 9
th
Generation or higher Intel Core i3/i5/i7 processors
● Windows 10 64-bit version or higher (Anniversary Update)
● Intel Rapid Storage Technology driver version 15.9.1.1018 or higher
External ports
Table 8. External ports-Integrated
Description Values
Network port/slots Rear
● One RJ45 Ethernet port
● Two knock-out slots for wireless antenna
USB ports Front
● One USB 3.2 Gen 2x2 capable Type-C port
● One USB 3.2 Gen 2 port with power share
Rear
● One USB 3.2 Gen 1 port
● One USB 3.2 Gen 1 port with smart power on
● Two USB 3.2 Gen 2 ports
Audio port Front
● One Universal audio jack
● One re-tasking Line out/Line in audio port
Specifications of OptiPlex 7090 Micro 19
To Next Page
Loading...
