L
Logan StoneAug 17, 2025
What does it mean when my Dell P98F Laptop has a memory or RAM failure?
- MMichael BaldwinAug 17, 2025
A memory or RAM failure on your Dell Laptop is indicated by diagnostic light code 2,4.
To Next PageTo Next PageWhat does it mean when my Dell P98F Laptop has a memory or RAM failure?
A memory or RAM failure on your Dell Laptop is indicated by diagnostic light code 2,4.
What does it mean if my Dell Laptop has a processor failure?
A processor failure in your Dell Laptop is indicated by diagnostic light code 2,1.
What does it mean if my Dell Laptop has a system board BIOS or ROM failure?
A system board BIOS or ROM failure on your Dell Laptop is indicated by diagnostic light code 2,2.
What does it mean if my Dell P98F has an invalid memory installed?
If your Dell Laptop has invalid memory installed, the diagnostic light code 2,5 will appear.
What to do with residual static electricity after powering off Dell P98F?
To drain residual static electricity from your Dell Laptop after powering off, press and hold the power button for 15 seconds.
What does it mean if my Dell P98F has a system-board or chipset error?
A system-board or chipset error on your Dell Laptop is indicated by diagnostic light code 2,6.
What does it mean if my Dell Laptop has a display failure?
A display failure on your Dell Laptop is indicated by diagnostic light code 2,7.
What does it mean if my Dell Laptop has a coin-cell battery failure?
A coin-cell battery failure on your Dell Laptop is indicated by diagnostic light code 3,1.
What does it mean if my Dell Laptop has a PCI, video card/chip failure?
A PCI, video card or chip failure on your Dell Laptop is indicated by diagnostic light code 3,2.
What does it mean if my Dell P98F Laptop recovery image is not found?
If the recovery image is not found on your Dell Laptop, the diagnostic light code 3,3 will appear.
Instructions for checking system information in Windows.
Instructions for checking system information in Ubuntu.
Read computer safety information and find best practices on the regulatory compliance homepage.
Do not remove the computer cover unless installing internal accessories; refer to manuals for instructions.
Retain and install filler brackets/cards to maintain FCC certification and computer airflow.
Specifies the range of voltage the power adapter accepts.
Details the maximum current drawn by the power adapter.
Indicates the acceptable input frequency for the power adapter.
Specifies the current output of the power adapter.
Details the voltage output from the power adapter.
States the highest ambient temperature for safe operation.
Connect the power adapter and cable to the computer and display if needed.
Turn on the computer and the display, if it is connected.
Represents the power adapter.
General
