Dell PowerEdge 1950 - LCD Status Messages

Information Update 17
E1625 PS AC Current Power source is out
of acceptable range.
Check the AC
power source.
E1711 PCI PERR B##
D## F##
The system BIOS
has reported a PCI
parity error on a
component that
resides in PCI
configuration space
at bus ##, device
##, function ##.
Remove and reseat
the PCIe expansion
cards. If the
problem persists,
see
"Troubleshooting
an Expansion Card"
in the Hardware
Owner’s Manual.
PCI PERR Slot
#
The system BIOS
has reported a PCI
parity error on a
component that
resides in the
specified PCIe slot.
Reinstall the
expansion-card riser.
See "Expansion
Card Risers" in the
Hardware Owner’s
Manual.
If the problem
persists, the riser
card or system board
is faulty. See
"Getting Help"
in the Hardware
Owner’s Manual.
Table 1-2. LCD Status Messages (continued)
Code Text Causes Corrective Actions