Dell PowerEdge 1950 - Non-Optimal Memory Configurations; Poweredge 1950 III - New System Features; New Performance Features; New High-Efficiency Power Supply and Power Monitoring Features

Information Update 5
Non-Optimal Memory Configurations
The POST may halt when a non-optimal memory configuration is detected
and the following message is displayed:
Non-Optimal Memory Configuration
Press F1 to continue or F2 for Setup
NOTE: Mixing DIMMs of different speeds renders the memory configuration
non6Hoptimal. The system clocks down the performance to the slowest speed
in the DIMM set for the channel.
PowerEdge 1950 III – New System Features
New Performance Features
• Two dual-core or quad-core Intel
®
Xeon
®
5400 Series and 5300 Series
processors.
• 8-GB memory module support.
New High-Efficiency Power Supply and Power Monitoring Features
• Higher system efficiency on power conversion across workloads.
• Baseboard Management Control (BMC) power monitoring monitors
current, voltage, and power utilization in the system.