Need help?Do you have a question about the Dell PowerEdge 2800 and is the answer not in the manual?
General| Product Line | PowerEdge |
|---|---|
| Model | 2800 |
| Processor Socket | Socket 604 |
| Chipset | Intel E7520 |
| Processor | Intel Xeon |
| Memory | Up to 16GB DDR2 |
| Storage Controller | PERC 4e/DC |
| Hard Drives | Up to 8 x 3.5-inch SAS or SATA |
| Network Controller | Embedded Broadcom Gigabit Ethernet |
| Network | 10/100/1000 Mbps Ethernet |
| Expansion Slots | 6 PCI-X |
| Power Supply | 750W |
| Operating System Support | Microsoft Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server |
Open the system, remove components, and locate the RAID memory module connector.
Install the RAID memory module, hardware key, and battery onto the riser card.
Close the system, verify settings, install RAID software, and charge the battery.
To Next Page