Need help?Do you have a question about the Dell POWEREDGE 840 and is the answer not in the manual?
General| Processor Socket | LGA 775 |
|---|---|
| Chipset | Intel 3000 |
| Memory Slots | 4 DIMM slots |
| Form Factor | Tower |
| Processor | Intel Xeon |
| Memory | Up to 8GB DDR2 |
| Drive Bays | 4 x 3.5" drive bays |
| Storage | SATA |
| RAID Support | PERC 5/i |
| Network | Embedded Broadcom NetXtreme II 5708 Gigabit Ethernet |
| Expansion Slots | 2 PCI |
| Operating System Support | Red Hat Linux |
Keystrokes to access system setup, diagnostics, BMC, SAS, and RAID utilities.
Identification and description of controls, indicators, and connectors on the system's front panel.
Explanation of diagnostic indicator lights during system startup and POST.
List of system messages, their causes, and corrective actions for problems.
Steps to turn on or restart the system and press F2 to enter the setup program.
Overview of available configuration options within the System Setup program.
Configuration options for integrated hardware devices like IDE, SATA, USB, and NIC controllers.
Options for setting system passwords, setup passwords, and chassis intrusion detection.
List of tools required for installing system components, including screwdrivers and grounding strap.
Safety precautions and steps to open the system cover and remove the bezel.
Procedure for installing hard drives into the system's drive bays and connecting cables.
Step-by-step guide for installing memory modules into the system board sockets.
Important safety precautions and warnings for working inside the computer system.
Guidance on what to look and listen for during the system's start-up routine for indications.
Steps to resolve hard drive errors, including device driver issues and recognition problems.
Steps to resolve issues with faulty memory modules, system board, or diagnostic lights.
Using Dell's PowerEdge Diagnostics suite for hardware testing of chassis and storage components.
Methods for running diagnostics from the utility partition or removable bootable media.
Explanation of different testing options like Express, Extended, and Custom tests.
Information on the location and settings of configuration jumpers on the system board.
Location and description of various connectors found on the system board.
Procedure to disable system and setup passwords using the password jumper on the system board.
Steps to take before calling Dell for technical assistance, including troubleshooting and diagnostics.
Accessing Dell support resources and help tools via the web.
Information on Dell's 24/7 support service staffed by personnel using computer-based diagnostics.
Various websites and contact methods for reaching Dell support electronically.
To Next Page
