Dell POWEREDGE 4300 - Page 7

Dell PowerEdge 4300 System Board Upgrade Installation 5
5 HPR YL QJ W KH&RYHU V
To remove the covers, perform the following steps:
1. Turn the keylock on the back edge of the cover to the unlocked position (see
Figure 3).
)LJXUH&RPSXWHU&RYHU5HPRYDO
2. Slide the cover about a centimeter (half an inch) toward the back of the computer.
3. Grasp the top of the cover at both ends and lift it away from the chassis.
computer cover
keylock